2016 Alabama/Florida Training Schedule

 

Below is the Fall 2016 training schedule for our Alabama and Florida Branches. Seats are $75 (free for Customer Care Dealers) and are open to dealers of all brands. Please call the training center branch to reserve your spots.

Click Here for Georgia Training Sessions 

Upcoming Trainings Listed Below

 

North Alabama Trainings


   

March 27, 2017
 
Heat Pumps
 
Location: CCP Huntsville, 102 Shuttle Court NW, Huntsville, AL 35806
Time: 8:00am-12:00pm

This class will cover heat pump, air handler and furnace controls, boards and dip switches as related to proper function of heat pumps.  We will cover in depth the importance of air flow and how to measure and adjust CFM using different methods, because proper air flow is the foundation of a well tuned and properly performing system, the technician must have a good knowledge of this subject e will also demonstrate proper troubleshooting techniques. Schematics and wiring diagrams will be covered, to help the technician solve problems in a logical manner. The different types of motors, including PSC, X-13/ECM, and variable speed will be covered, and we will discuss the pros and cons of each. Sub-cooling and superheat and the effect system conditions have on each will be covered, along with proper charging procedures and the measurements and instrumentation required.

Call 256-859-1220 to reserve your spot.
 
 
 
March 28, 2017
 
Heat Pumps
 
Location: CCP Pelham, 141 Cahaba Valley Pkwy, Pelham, AL 35124
Time: 8:00am-12:00pm

This class will cover heat pump, air handler and furnace controls, boards and dip switches as related to proper function of heat pumps.  We will cover in depth the importance of air flow and how to measure and adjust CFM using different methods, because proper air flow is the foundation of a well tuned and properly performing system, the technician must have a good knowledge of this subject e will also demonstrate proper troubleshooting techniques. Schematics and wiring diagrams will be covered, to help the technician solve problems in a logical manner. The different types of motors, including PSC, X-13/ECM, and variable speed will be covered, and we will discuss the pros and cons of each. Sub-cooling and superheat and the effect system conditions have on each will be covered, along with proper charging procedures and the measurements and instrumentation required.

Call 205-985-0008 to reserve your spot. 
 
 
 
March 29, 2017
 
Heat Pumps
 
Location: CCP Montgomery, 1820 Ridgeway East, Montgomery, AL 36110
Time: 8:00am-12:00pm

This class will cover heat pump, air handler and furnace controls, boards and dip switches as related to proper function of heat pumps.  We will cover in depth the importance of air flow and how to measure and adjust CFM using different methods, because proper air flow is the foundation of a well tuned and properly performing system, the technician must have a good knowledge of this subject e will also demonstrate proper troubleshooting techniques. Schematics and wiring diagrams will be covered, to help the technician solve problems in a logical manner. The different types of motors, including PSC, X-13/ECM, and variable speed will be covered, and we will discuss the pros and cons of each. Sub-cooling and superheat and the effect system conditions have on each will be covered, along with proper charging procedures and the measurements and instrumentation required.

Call 334-386-1873 to reserve your spot.
 
 
 
April 5, 2017
 
Variable Speed Training
 
Location: CCP Huntsville, 102 Shuttle Court NW, Huntsville, AL 35806
Time: 8:00am-12:00pm
 
Call 256-859-1220 to reserve your spot.

 

 

 

Daphne and Pensacola Trainings


 

March 1, 2017
 
Heat Pumps
 
Location: CCP Pensacola, 4901 Chaney Street, Pensacola, FL 32503
Time: 8:00am-12:00pm

This class will cover heat pump, air handler and furnace controls, boards and dip switches as related to proper function of heat pumps.  We will cover in depth the importance of air flow and how to measure and adjust CFM using different methods, because proper air flow is the foundation of a well tuned and properly performing system, the technician must have a good knowledge of this subject e will also demonstrate proper troubleshooting techniques. Schematics and wiring diagrams will be covered, to help the technician solve problems in a logical manner. The different types of motors, including PSC, X-13/ECM, and variable speed will be covered, and we will discuss the pros and cons of each. Sub-cooling and superheat and the effect system conditions have on each will be covered, along with proper charging procedures and the measurements and instrumentation required.

Call 850-475-8635 to reserve your spot.
 
 
 
March 2, 2017
 
Heat Pumps
 
Location: CCP Daphne, 8020 American Way, Daphne, AL 36526
Time: 8:00am-12:00pm

This class will cover heat pump, air handler and furnace controls, boards and dip switches as related to proper function of heat pumps.  We will cover in depth the importance of air flow and how to measure and adjust CFM using different methods, because proper air flow is the foundation of a well tuned and properly performing system, the technician must have a good knowledge of this subject e will also demonstrate proper troubleshooting techniques. Schematics and wiring diagrams will be covered, to help the technician solve problems in a logical manner. The different types of motors, including PSC, X-13/ECM, and variable speed will be covered, and we will discuss the pros and cons of each. Sub-cooling and superheat and the effect system conditions have on each will be covered, along with proper charging procedures and the measurements and instrumentation required.

Call 251-625-8998 to reserve your spot.
 
  

 

 

Panama City Trainings


 

February 28, 2017
 
Heat Pumps
 
Location: CCP Panama City, 17621A Ashley Road, Panama City Beach, FL 32413
Time: 8:00am-12:00pm

This class will cover heat pump, air handler and furnace controls, boards and dip switches as related to proper function of heat pumps.  We will cover in depth the importance of air flow and how to measure and adjust CFM using different methods, because proper air flow is the foundation of a well tuned and properly performing system, the technician must have a good knowledge of this subject e will also demonstrate proper troubleshooting techniques. Schematics and wiring diagrams will be covered, to help the technician solve problems in a logical manner. The different types of motors, including PSC, X-13/ECM, and variable speed will be covered, and we will discuss the pros and cons of each. Sub-cooling and superheat and the effect system conditions have on each will be covered, along with proper charging procedures and the measurements and instrumentation required.

Call 850-708-3171 to reserve your spot.